1.10 (2012-11-29)
  improvements:
  - talkback gain reduced (default was way too high)
  - surface engine redesigned to support all new models
  - handling of fader move events while switching fader assignment fixed
  - bus afl solo now always post insert
  - sporadic noise when changing insert position removed
  - user buttons can now be (re-)assigned to JUMP function regardless of previous function (by holding one
    of the SET buttons)
  - user defined buttons now correctly return to previous banks when used for sends on faders
  new features:
  - direct control of all preamps (on setup page) to allow inline recording mode and live card inserts
    (route local or aes inputs to card, route card returns to console input channels - set preamp
     gain (2.5 dB steps) on this new setup page, adjust digital trim on console 'tape return' channels)
  - Dual and Stereo DeEsser Effect with M/S processing option
  - phase invert on matrix buses 
  - xover filter types (butterworth, bessel, linkwitz-riley up to 24dB/oct) on matrix bus eq bands 1/6
    (selectable on EQ page). These use bands 1+2 and/or bands 5+6 when activated.
  - matrix send taps selectable (pre/pos EQ, pre/post fader)
  - independent channel mute and fader safes
  - channel/bus mute indication on meter screens
  - scribble strip editing removed from CONFIG/UTILTY page - now accessible on SETUP/SCRIBBLE STRIP page
    (or use select button + UTILITY shortcut)
  notes:
  - due to additional scenes parameters (matrix bus options) all scenes that use matrix buses should be checked
    (existing scenes do not contain the additional parameters). It is best to initialize the console, then load and
    immediately safe back each scene.

1.09 (2012-09-27)
  improvements:
  - when 'safe main level' and 'm/c depends on main l/r' are activated,
    m/c level is no longer set to -oo on powerup
  - user defined buttons now correctly return to previous page when used as channel select
  - 'pre' leds now correctly work when auxes or fx returns are selected
  - player now plays non-canonical wave files with no artifacts at the end
  - recoder automatically restarts with new file when size limit (2GB) is exceeded
  - dca solo now also includes channels that are not routed to main L/R (e.g. to group buses)
  - erratic behaviour of ch 1 input delay and matrix 6 insert fixed
  new features:
  - current settings (i.e. single scene) can now directly be saved (to the usb drive)
  - fx utilities include algorithm (fx type) selection
  - osc server updated to 0.7 (to support XiControl update)
  - signal flow diagrams dynamically updated when changing dyn/insert position
  
1.08 (2012-08-31)
  improvements:
  - ambience fx redraw issue fixed
  - player/recorder no longer drops last block
  - crash when using channel library after assigning '- Param 64 -' to any assignable controller fixed
  - pre/post indication on channel home screen updated
  new features:
  - sends on fader on a specific channel or bus can be assigned to user assignable buttons
  - scenes can be assigned to user assignable buttons
  - holding down a select button and pressing UTILITY now directly accesses the naming screen
  - solo option 'Dim PFL' allows to apply DIM to PFL sources (to align levels when using as monitor console)

1.07 (2012-08-22)
  improvements:
  - sporadic freeze when using presets/scenes with long names (> 15 characters) fixed
  new features:

1.06 (2012-08-21)
  improvements:
  - freeze when using library fx load with confirmation disabled fixed
  - thump noise when using master GEQ and loading tremolo/pan into any other fx slot removed
  - main bus afl solo fixed
  - non-ascii characters in filenames (on usb thumb drive) are now ignored so that these files
    can be selected for play (though it is recommended to use ascii characters only)
  - after song has been played (in single mode), player returns to stop mode
  - high eq in tube stage fx fixed
  - dyn key source parameter now correctly disabled on matrix and main channels
  new features:

1.05 (2012-08-06)
  improvements:
  - channel link fixed when used with remote control
  new features:
  - daw remote control level meter support

1.04 (2012-07-30)
  improvements:
  - pre/post send indication on home page fixed (PRE was indicated with the wrong icon)
  - send section update issues fixed on home page when using eth remote control
  - channel sends not fully updated when changing send type from/to GROUP
  - initialize console now sets pans on AUX7/8 to hard left/right
  - osc server crashed when path not found - fixed
  new features:
  - Undo button also available on Scenes/Home screen
  - hold UTILITY button to initialize console during boot (same function as UNDO but X16 doesn't have an UNDO button)
  - osc server updated to 0.60 (to support pc remote release)

1.03 (2012-07-11)
  improvements:
  - rotary effect bug fixed
  - media full now correctly recognized during file write
  new features:
  - user section now supports midi events
  - user section now supports daw remote control functions
  - midi over aes50 for S16 (user section midi and scene midi)
  - selected channel and fader clip leds indicate (analog) input clip even with negative trim values

1.02 (2012-06-19)
  improvements:
  - unit now correctly syncs on AES50 port B @ 44K1 on startup
  - correct enumeration of remote controllable preamps (i.e. S16 port B)
  - sporadic sync problem (AES50 slave clock phase) on startup fixed
  - scan rate of small lcds changed to avoid flickering
  new features:
  - new lock screen
  - console init sets gate threshold to -80dBFS and range to 60dB now
  
1.01 (2012-06-01)
  improvements:
  - increased compatibility with slow starting thumb drives
  new features:

